Skip to main content
close
font 1 font 2 font 3
Reset to standard size
Font size options
Increase or decrease the font size for this website by clicking on the 'A's.
Yellow on Black White on Black Soft Greys Black on Linen Black on White
Reset to default contrast
Contrast options
Choose a color combination to give the most comfortable contrast.

3D Printing – Multicolor

Bambu Lab P1S 3D Printer with AMS

Skip Bambu Lab P1S 3D Printer with AMS widget

To submit a multicolor 3D print, please make a reservation with a Makerspace Associate.

Capabilities

  • Build Volume (WxDxH): 256 x 256 x 256 mm³*
  • Enclosed-body for high-temperature filament printing
  • Up to 4-color printing
  • Nozzle Diameter 0.4 mm

*Denotes max dimensions for a print. 3D print size may be limited depending on estimated print time.

Compatible Materials

  • PLA, PETG, TPU, PVA, PET, ABS, ASA

Software

  • Bambu Studio

Prerequisite Knowledge

  • Basic understanding of 3D modeling software, or have a pre-modeled .STL file
Makerspace Material Fees
Skip Makerspace Material Fees widget
3D Printer Filament $0.05/gram
Basswood, 12” x 12” sheet, ⅛” thick $2.00/sheet
Button, pin-back $0.10/each
Mug, 11 oz. white $2.50/each
Mug, 15 oz. white $3.50/each
Sublimation Printer page, 8.5” x 11” sheet $0.50/sheet
Vinyl, standard adhesive, 24” roll, per inch $0.15/inch
Print standard adhesive, 8.5” x 11” sheet $1.00/sheet
Vinyl, heat transfer, 12” roll, per inch $0.25/inch
Print Vinyl, heat transfer, 8.5” x 11” sheet $1.00/sheet
Window cling material, 30" roll, per inch $0.25/inch
Specialty/Limited Run Items Varies

Makerspace materials fees are charged for all materials consumed, including errors and waste. Not all materials may be in stock. Users may provide their own approved materials at no cost.